Road Sign Information (Rsi)* - Limitations; Speed Limiter - Volvo V40 Cross Country Owner's Manual

07 Driver support
||
To deactivate the RSI function:
•
Search for the function in the menu sys-
tem MY CAR MY CAR (p. 109), uncheck
Road sign information
with EXIT.
Speed Alert On/Off
The driver can opt to receive a warning when
the applicable speed limit is exceeded by
5 km/h or more. This warning is given by the
symbol showing the applicable maximum
speed temporarily flashing when this speed is
exceeded.
To activate speed warning:
•
Search for the function in the menu sys-
07
tem MY CAR MY CAR (p. 109), check
Speed alert
and back out with EXIT.
Related information
•
Road Sign Information (RSI) (p. 188)
•

Road sign information (RSI)* - limitations

(p. 190)
•
MY CAR (p. 109)
*
190
Option/accessory, for more information, see Introduction.
Road sign information (RSI)* -
limitations
The road sign information function (RSI –
Road Sign Information) helps the driver to
and back out
remember which road signs the car has
passed. The function has the following limita-
tions.
The RSI function's camera sensor has limita-
tions just like the human eye. Find out more
about this in the section on the camera sen-
sor limitations (p. 230).
Signs which indirectly provide information on
a prevailing speed limit, e.g. name signs for
towns/districts, are not recorded by the RSI
function.
Here are some other examples of what can
disrupt the function:
•
Faded signs
•
Signs positioned on bends
•
Rotated or damaged signs
•
Concealed or poorly positioned signs
•
Signs completely or partly covered with
frost, snow and/or dirt.
Related information
•
Road Sign Information (RSI) (p. 188)
•
Road sign information (RSI)* - operation
(p. 188)

Speed limiter*

A (Speed Limiter) can be regarded as a
reverse cruise control - the driver regulates
the speed using the accelerator pedal but is
prevented from accidentally exceeding a pre-
selected/set speed by the speed limiter.
Steering wheel keypad and combined instrument
panel Digital and Analogue.
Speed limiter - On/Off.
Standby mode ceases and the stored
speed is resumed.
Standby mode
Activate and adjust the max. speed.
Selected speed
Speed limiter active