Jura GIGA X3 Operating & Cleaning Instructions page 6

Weekly milk system clean
Complete this procedure once a week after the daily milk system clean
1. Remove the splash back.
2. Remove spout cover. Press the black releasing buttons and lift.
3. Pull the milk outlet down
4. Remove the auto frother by pulling it towards you.
5. Separate the auto frother into 6 parts.
6. Soak all 6 parts in 250ml of warm (not hot) water & 15ml of milk cleaner for 15 - 20 min (max).
7. Remove the parts from solution and rinse under cold tap water.
8. Check that water flows through the milk outlet freely.
9. Re-assemble the auto frother ensuring the arrow tips line up.
10. Refit the auto frother, spout cover and splash back.
Please note: The splash back protects the spout slide behind it from milk splatters and must be fitted
Figure 1
Figure 6
My Coffee Shop Pty Ltd
ACN 102 850 037
servicecentre@mycoffeeshop.com.au
(Fig 1)
(Fig 4) and the milk hose out.
(Fig 7)
Figure 2 Figure 3
Figure 7
Figure 8
(Fig 2 – 3)
(Fig 5)
(Fig 6)
(Fig 8)
(Fig 9)
Figure 4
Figure 9
9 Hall Street
Hawthorn East Vic 3123
ph: 03 9946 4160
fax: 03 9822 6269
1300 365 487
.
Figure 5
93/1-5 Harwood Street
Pyrmont NSW 20009
ph: 02 9034 6580
fax: 02 9034 6586
www.mycoffeeshop.com.au