Toggling The Loop Recording Mode On/Off - Silvercrest SCW 5 A1 User Manual And Service Information

SilverCrest SCW 5 A1

Toggling the loop recording mode on/off

This menu allows you to enable or disable the loop recording mode. Loop recording is only
possible when storing the recordings on a memory card. Please note that this mode will
overwrite existing data once the memory card is full. The oldest data is overwritten first.
Proceed as follows to toggle this mode on or off:

Press the On/Off/Mode button [2] multiple times to select the SETUP menu and then
press the record button [9] to confirm.

Press the On/Off/Mode button [2] multiple times until the LOOP menu is highlighted.
Press the record button [9] to open the LOOP menu.

Press the On/Off/Mode button [2] to select an option. The following settings are
available: "ON" and "OFF".

Press the record button [9] to confirm your selection.

To exit the SETUP menu, press the On/Off/Mode button [2] multiple times until the EXIT
item is highlighted and then press the record button [9] to confirm.
36 - English
As soon as loop recording has been enabled you can press the
recording button [9] to start or stop recording. During loop recording the
status indicator [15] flashes red. To be able to select a different
recording mode you first have to disable loop recording. Also, in loop
recording there are only a few setup options available.
Select "ON" to enable the loop recording
mode or select "OFF" to disable it.