Hills NVR-CH4 Quick Manual page 6

No. Name
4 USB Interfaces
NVR-16Channel (NVR-CH16)
No. Name
Status
1
Indicators
2 DVD-R/W
Control
3
Buttons
Function Description
Open the manual record interface.
Enter numeral "8";
Enter letters "TUV";
8/TUV/PTZ
Access PTZ control interface.
Enter numeral "9";
9/WXYZ/PRE
Enter letters "WXYZ";
V
Multi-channel display in live view.
Enter numeral "0";
Shift the input methods in the editing text field. (Upper and
0/A
lowercase, alphabet, symbols or numeric input).
Double press the button to switch the main and auxiliary output.
Universal Serial Bus (USB) ports for additional devices such as
USB mouse and USB Hard Disk Drive (HDD).
Function Description
POWER Turns green when NVR is powered up.
READY
The LED is green when the device is running normally.
The light is green when the IR remote control is enabled;
The light is red when the function of the composite keys (SHIFT)
STATUS
are used;
The light is out when none of the above condition is met.
ALARM
The light is red when there is an alarm occurring.
HDD
Blinks red when HDD is reading/writing.
Tx/Rx
Blinks green when network connection is functioning normally.
Slot for DVD-R/W.
In menu mode, the direction buttons are used to navigate between
different fields and items and select setting parameters.
In playback mode, the Up and Down buttons are used to speed up
DIRECTION and slow down record playing, and the Left and Right buttons are
used to move the recording 30s forwards or backwards.
In the image setting interface, the up and down button can adjust
the level bar of the image parameters.
5