Accessing Via Web Browser; Logging In; Live View - Hills NVR-CH4 Quick Manual

Accessing via Web Browser

Logging In

You can get access to the device via web browser. Open a web browser, input the IP address of the device and then
press Enter. The login interface appears:
Input the user name and password, and click the Login button.
Note:
 By default DHCP client is enabled. NVR will search for DHCP server for 30 seconds if the network doesn't
have a DHCP server then NVR will switch to fixed IP address.
 The default IP address is 10.2.2.2 and Subnet mask 255.0.0.0.
 The default user name is admin, and password is admin.
 You may use one of the following listed web browsers: Internet Explorer 6.0, Internet Explorer 7.0, Internet
Explorer 8.0, Internet Explorer 9.0, Internet Explorer 10.0, Apple Safari, Mozilla Firefox, and Google
Chrome.
 The supported resolutions include 1024*768 and above.
When you log in for the first time, the system will remind you to install the Plug-in control. After the installation,
you can configure and manage the device remotely.

Live View

The live view interface appears by default when you log in the device.
Accessing via Web Browser
20
4