Hills NVR-CH4 Quick Manual page 22

Interface Introduction
No. Name
Channel List
1
Live View Window
2
3 Play Control Bar
4 PTZ Control
Video Parameters
5
Configuration
Start Live View
Steps:
1. In the live view window, select a playing window by clicking the mouse.
2. Double click a camera from the device list to start the live view.
3. You can click the
Refer to the following table for the description of buttons on the live view window:
Icon Description
Select the window-division mode
Start/Stop all live view
/
Capture pictures in the live view
mode
Description
Displays the list of channels and the playing and recording status of each
channel.
Note:
The stream type can be switched by clicking the icon before the channel
name: stands for main stream and
Displays the image of channel, and multi-window division is supported.
Play control operations are supported.
Pan, tilt, zoom operations are supported, as well as preset editing and
calling.
Note:
PTZ function can only be realized if the connected camera supports PTZ
control.
Brightness, contrast, saturation and hue of the image can be adjusted.
button on the toolbar to start the live view of all cameras on the device list.
21
for sub-stream.
Icon Description
On/Off audio
/
Start/Stop two-way Audio
/
Adjust volume