Hills NVR-CH4 Quick Manual page 4

4 USB Interfaces
NVR-8Channel (NVR-CH8)
No. Name
Status
1
Indicators
The F2 button is used to change the tab pages.
In PTZ control mode, it zooms in the image.
Enter numeral "4";
Enter letters "GHI";
4/GHI/ESC
Exit and back to the previous menu.
Enter numeral "5";
Enter letters "JKL";
5/JKL/EDIT Delete characters before cursor;
Check the checkbox and select the ON/OFF switch;
Start/stop record clipping in playback.
Enter numeral "6";
Enter letters "MNO";
6/MNO/PLAY
Playback, for direct access to playback interface.
Enter numeral "7";
Enter letters "PQRS";
7/PQRS/REC
Open the manual record interface.
Enter numeral "8";
Enter letters "TUV";
8/TUV/PTZ
Access PTZ control interface.
Enter numeral "9";
Enter letters "WXYZ";
9/WXYZ/PREV
Multi-channel display in live view.
Enter numeral "0";
Shift the input methods in the editing text field. (Upper and
0/A
lowercase, alphabet, symbols or numeric input).
Double press the button to switch the main and auxiliary output.
Universal Serial Bus (USB) ports for additional devices such as
USB mouse and USB Hard Disk Drive (HDD)
Function Description
POWER Turns green when NVR is powered up.
READY
The LED is green when the device is running normally.
The light is green when the IR remote control is enabled;
The light is red when the function of the composite keys (SHIFT)
STATUS
are used;
The light is out when none of the above conditions are met.
ALARM
The light is red when there is an alarm occurring.
HDD
Blinks red when HDD is reading/writing.
3