Playback - Hills NVR-CH4 Quick Manual

1) Configure All Day or Customize Record:
 If you want to configure the all-day recording, please check the All Day checkbox.
 If you want to record in different time sections, check the Customize checkbox. Set the Start
Time and End Time.
Note:
Up to 8 segments can be configured and each segment cannot be overlapped.
2) Select a Record Type. The record type can be Continuous, Motion, Alarm, Motion & Alarm, Motion |
Alarm and VCA.
3) Check the checkbox of Select All and click Copy to copy settings of this day to the whole week. You
can also check any of the checkboxes before the date and click Copy.
4) Click OK to save the settings and exit the Edit Schedule interface.
6. Click Advanced to configure advanced record parameters.
7. Click Save to activate the above settings.

Playback

Interface Introduction
No. Name
Channel List
1
2 Playback Window
Play Control Bar
3
4 Time Line
5 Playback Status
Calendar
6
Start Playback
Steps:
1. Click Playback on the menu bar to enter playback interface.
2. Click the camera from the device list for playback.
3. Select the date from the calendar and click Search.
4. Click the Play button to play the video file searched on the current date.
5. Use the buttons on the toolbar to operate in playback mode.
Description
Displays the list of channels and the playing status of each channel.
Displays the image of channel.
Play control operations are supported.
Displays the time bar and the recording are marked with different colors.
Displays the playback status, including channel number and playback speed.
Select the date to play.
23