Speed Change - Makita HP2040 Instruction Manual

1
1. Speed change knob
1. Action mode changing button

Speed change

002418
Two speed ranges can be preselected with the speed
change lever.
To change the speed, turn the speed change lever to the
position 1 for low speed or the position 2 for high speed. If
the speed change lever does not turn easily, turn the chuck
slightly in either direction and turn the lever again.
Be sure that the speed change lever is set to the correct
position before operation. Use the right speed for your job.
CAUTION:
• Always set the speed change lever fully to the correct
position. If you operate the tool with the speed change
lever positioned halfway, the tool may be damaged.
• Do not use the speed change lever while the tool is
running. The tool may be damaged.
Selecting the action mode
002425
This tool has an action mode changing button.
1
For rotation with hammering, depress the button from the
side with
For rotation only, depress the button from the side with
symbol fully.
CAUTION:
• Always depress the action mode changing button all the
way to your desired mode position. If you operate the
tool with the button positioned halfway between the
mode symbols, the tool may be damaged.
symbol fully.
7