Programming Individual Users - Essex Electronics SKE-34B Installation And Instruction Manual

Programming Individual Users

Authorized users (master code or any user authorized to program) can
program users directly from the Keypad. Each Individual User can be as-
signed various authorizations. Review System Setup before programming
individual users.
1. Enter
2. Enter an Authorized Code followed by
Example:
This opens programming and causes:
3. Proceed to one of the following seven programming options:
Adding a New User

a. Enter
b. Enter the User ID (1 to 500) followed by
c. Enter the User Code/PIN (3-8 digits), followed by
d. FOR NO AUTHORIZATIONS, SKIP TO STEP E. To give special
Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com
18
* 1
* 1 1
1 #
Authorizations, enter the Authorization Code, followed by #.
Repeat for additional authorizations.
Code User Authorization
1 Latching Authorization
2 Program or Delete Users Authorization
3 Output A Authorization (see notes)
4 2nd Door (see notes)
5 Output B Authorization (see notes)
6-7
Continued on next page
#
2 3 #
Red LED Green LED
Slow Flash Solid
#
#