Programming System Setup - Essex Electronics SKE-34B Installation And Instruction Manual

Programming System Setup

The System Setup can only be modified if you know the Master Code.
When the system is initially set up, the default system settings should be
reviewed prior to other programming.
1. Enter
2. Enter the Master Code followed by
Example:
This opens programming and causes:
3. Proceed to one of the following eight programming options:
Changing the Master Code (Default: 1,2,3)

a. Enter
b. Enter the New Master Code followed by
c. Return to Step 3 or enter
Note: If you forget the Master Code, momentarily ground the
ORANGE wire. This will take you to Step 3 of Programming System
Setup. Once you enter setup mode, you have 30 seconds to begin the
program sequence.
Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com
12
* 3
* 3 1 2 3 #
1 #
Keypad Status After Step Completion
Step Beep
a Double Fast Flash
b Triple
#
* *
to exit programming.
Red LED Green LED
Slow Flash
Fast Flash Solid
Red LED Green LED
Fast Flash Solid
#