Pair Devices - Nokia N85 User Manual

To interrupt the search, select Stop.
3. Select the device with which you want to
connect.
4. If the other device requires pairing before data
can be transmitted, a tone sounds, and you are
asked to enter a passcode.
devices", p. 42.
When the connection is established,
data is displayed.
Tip: When searching for devices, some
devices may show only the unique address
(device address). To find the unique address
of your device, enter *#2820# in the standby
mode.

Pair devices

To pair with compatible devices and view your
paired devices, in the main view of Bluetooth
connectivity, scroll right.
Before pairing, create your own passcode (1 to 16
digits), and agree with the owner of the other
device to use the same code. Devices that do not
have a user interface have a factory-set passcode.
The passcode is used only once.
1. To pair with a device, select
paired device. Devices that are within range are
displayed.
42
2.
3.
See "Pair
Paired devices are indicated by
Sending
search.
To set a device as authorised or unauthorised, scroll
to the device, and select from the following options:
●
●
To cancel a pairing, scroll to the device, and select
Options
If you want to cancel all pairings, select
Options New
>
Delete
Select the device, and enter the passcode. The
same passcode must be entered on the other
device as well.
Some audio enhancements connect
automatically to your device after pairing.
Otherwise, scroll to the enhancement, and select
Options Connect to audio
>
Set as authorised — Connections between your
device and the authorised device can be made
without your knowledge. No separate
acceptance or authorisation is needed. Use this
status for your own devices, such as your
compatible headset or PC or devices that belong
to someone you trust.
devices in the paired devices view.
Set as unauthorised — Connection requests
from this device must be accepted separately
every time.
> Delete.
all.
device.
in the device
indicates authorised
Options
>