Connection Manager - Nokia N85 User Manual

To start a search for available WLANs, select the
status and Search for WLAN. To set WLAN scanning
off, select the status and select
off.
To access the WLAN wizard application in the menu,
press , and select Tools
WLAN internet access points
Press , and select Tools
Select Options and from the following:
Filter WLAN networks
●
the list of found networks. The selected networks
are filtered out the next time the application
searches for WLANs.
Details — View the details of a network shown
●
in the list. If you select an active connection, the
connection details are displayed.
Define access point — Create an internet access
●
point (IAP) in a WLAN.
Edit access point — Edit the details of an
●
existing IAP.
You can also use connection manager to create
internet access points. See "Active data
connections", p. 39.
Operating modes
There are two operating modes in WLAN:
infrastructure and ad hoc.
WLAN scanning
WLAN wiz..
>
WLAN wiz.
>
— Filter out WLANs in
The infrastructure operating mode allows two
kinds of communication: wireless devices are
connected to each other through a WLAN access
point device, or wireless devices are connected to a
wired LAN through a WLAN access point device.
In the ad hoc operating mode, devices can send and
receive data directly with each other.

Connection manager

Active data connections
Press , and select Tools
Conn. mgr. Active data
>
In the active data connections view, you can see the
open data connections:
data calls
packet data connections
WLAN connections
Note: The actual invoice for calls and services
from your service provider may vary, depending on
network features, rounding off for billing, taxes,
and so forth.
To end a connection, select
Disconnect. To close all open connections, select
Options Disconnect
>
Connectivity
> >
connections.
Options
>
all.
39