Settings; Access Codes - Nokia N85 User Manual

After updating your device software using
Application Update, the instructions in the user
guide or the helps may not be up to date.
To download the available updates, select
Options Start update.
>
To unmark updates, scroll to them, and press the
scroll key.
To view information on an update, select
View details.
To change the settings, select

Settings.

Settings
Your device normally has MMS, GPRS, streaming, and
mobile internet settings automatically configured,
based on your network service provider
information. You may have settings from your
service providers already installed in your device, or
you may receive or request the settings from the
network service providers as a special message.
You can change the general settings in your device,
such as language, standby mode, display, and
keypad lock settings.
18
Options
Options
>
See "Settings", p. 154.

Access codes

If you forget any of the access codes, contact your
service provider.
Personal identification number (PIN) code — This
●
code protects your SIM card against
unauthorised use. The PIN code (4 to 8 digits) is
usually supplied with the SIM card. After three
consecutive incorrect PIN code entries, the code
>
is blocked, and you need the PUK code to unblock
it.
UPIN code — This code may be supplied with the
●
USIM card. The USIM card is an enhanced version
of the SIM card and is supported by UMTS mobile
phones.
PIN2 code — This code (4 to 8 digits) is supplied
●
with some SIM cards, and is required to access
some functions in your device.
Lock code (also known as security code) — The
●
lock code helps you to protect your device
against unauthorised use. You can create and
change the code, and set the device to request
the code. Keep the new code secret and in a safe
place separate from your device. If you forget the
code and your device is locked, your device will
require service and additional charges may
apply. For more information, contact a Nokia Care
point or your device dealer.
Personal unblocking key (PUK) code and PUK2
●
code — These codes (8 digits) are required to