Repeat Play; Program Play; Aux In Operation; Stopping Play - Naxa NPB-426 Instruction Manual

Selecting a Different Track during Play
1. Press CD SKIP/SEARCH NEXT/BACK button on the unit continuously until the desired track
number appears in the display.
2. Playback starts from the desired track. (Press CD PLAY/PAUSE button to start playback in
stop mode)
Starting Again With the Track That Is Currently Playing
1. Press CD SKIP/SEARCH BACK button once.
2. The playback will start again from the beginning of the track.

Stopping Play

1. Press CD STOP button if you wish to stop play. The total track number which can be played
will now appear in the display.
2. Open the CD door on the unit to remove the CD.

REPEAT PLAY

When playing, press REPEAT button once. "REPEAT" indicator will be flashing the same track
only. If repeat all tracks, press the REPEAT button again, "REPEAT" indicator will be on and
steady. To cancel repeat play, press the REPEAT button until the "REPEAT" indicator disappear.

PROGRAM PLAY

Programming tracks of disc are possible when playback is stopped. Up to 20 tracks can be
stored in the memory in any order.
1. Press PROGRAM button to make program memory in stop mode.
2. PROGRAM indicator will be shown flashing on the display.
3. Press CD SKIP/SEARCH NEXT/BACK button to select a track number. The track number
will show on display.
4. Press the PROGRAM button to store the track number.
5. PROGRAM indicator flashes again. Repeat step (3) to (4) to program other desired tracks.
6. Press PROGRAM button repeatly and all the programmed track numbers will be shown one
by one
7. Press CD PLAY/PAUSE button. Playback will start from the first programmed track.
8. You can press CD SKIP/SEARCH NEXT/BACK button to select the track number in
memory.
9. In stop mode, press STOP button to cancel the programmed play.
X-BASS SYSTEM
The X-BASS BUTTON controls the bass of the unit. Bass sound is the lower frequency ranges
of sound. The knob can be pushed to OFF or ON position, When the X-BASS is on, the unit
boosts (increases) the sound output of the bass frequencies.

AUX IN OPERATION

This unit has provided special AUX IN jack, through this jack other audio sources can be
connected to this unit and be amplified.
1. Set the FUNCTION switch to CD/AUX position.
2. Connect the audio cable into the AUX IN jack and the other end connecting to the AUDIO
OUT jack of the external audio source. The unit will change to AUX mode automatically.
3. Adjust the volume of the main unit to your desired level.
Press PLAY of the external audio source (eg. MP3 player) to start playback.
-6-