Naxa NPB-426 Instruction Manual

Naxa NPB-426 Instruction Manual

Portable cd player with stereo radio cassette recorder
Hide thumbs Also See for NPB-426:

Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for Naxa NPB-426

  • Page 2: Important Notes

    IMPORTANT NOTES INTRODUCTION Thank you for buying this product. Please read through these operating instructions, so you will know to operate your equipment properly. After you finished reading the instructions manual, put it away in a safe place for future reference.
  • Page 3: Location Of Controls

    LOCATION OF CONTROLS...
  • Page 4: Features And Controls

    FEATURES AND CONTROLS 1. HANDLE 19. CD REPEAT BUTTON 2. CD COMPARTMENT 20. TUNING CONTROL 3. FUNCTION SWITCH 21. BUILT-IN CONDENSER MIC. 4. BATTERY COMPARTMENT 22. SPEAKERS 5. STANDBY INDICATOR 23. CASSETTE RECORD BUTTON 6. LED DISPLAY 24. CASSETTE PLAY BUTTON 7.
  • Page 5: Tape Recording

    CASSETTE OPERATION PLAYBACK OF CASSETTE Be sure to tighten any slack tape in the cassette before use, using either a pencil or a ballpoint pen, simply insert the pen or pencil into the center of spool and rotate to remove slacks. Depress the STOP/EJECT button to open the cassette door.
  • Page 6: Listening To Compact Disc

    PROTECTING RECORDING Normally, anything recorded on the tape is automatically erased when new recording is made. It is possible to protect your recording from accidental erasure by removing the tabs found on the rear of the cassette. When the cassette is held with the recorded side upper-most and exposed tape facing the front, the protective tab will be found on the left rear of the cassette.
  • Page 7: Repeat Play

    Selecting a Different Track during Play 1. Press CD SKIP/SEARCH NEXT/BACK button on the unit continuously until the desired track number appears in the display. 2. Playback starts from the desired track. (Press CD PLAY/PAUSE button to start playback in stop mode) Starting Again With the Track That Is Currently Playing 1.
  • Page 8: Specifications General

    SPECIFICATIONS GENERAL Power Requirement …………………………………………AC 110/220V ~ 60/50Hz DC 12V UM-1 x 8 PCS Power consumption….…………………………………..….AC 17 Watts Weight …………………………………………………………Approx. 4.0kg Dimensions…………………………………………Approx. 455mm (W) x 220mm (H) x 240mm (D) Operation temperature ……………………………………. +5° C - + 35 °C RECEIVER SECTION Receiving Bands …………………………………………….AM / FM Tuning Range ……………………..

Table of Contents