Naxa NPB-263 Operating Instructions Manual

Naxa NPB-263 Operating Instructions Manual

Portable cd radio player

Advertisement

MODEL NPB-263
PORTABLE CD RADIO PLAYER

OPERATING INSTRUCTIONS

Please read and follow this instruction manual carefully before using the unit and retain it
for future reference

Advertisement

Table of Contents
loading

Summary of Contents for Naxa NPB-263

  • Page 1: Operating Instructions

    MODEL NPB-263 PORTABLE CD RADIO PLAYER OPERATING INSTRUCTIONS Please read and follow this instruction manual carefully before using the unit and retain it for future reference...
  • Page 2: Safety Instructions

    SAFETY INSTRUCTIONS TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT USE THIS PLUG WITH AN WARNING: EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE TERMINALS CAN BE FULLY INSERTED TO PREVENT ANY EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
  • Page 3 17. Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product.
  • Page 4 the unit. • When there is condensation inside the unit, the unit may not function normally. • Let it stand for 1 to 2 hours before turning the power on, or gradually heat the room up and dry the unit before use.
  • Page 5: Functions And Controls

    FUNCTIONS AND CONTROLS...
  • Page 6: Power Source

    1.CD DOOR 2.Handle 3.CD Track Display 4.CD STOP Button 5.PROG/+10 6.CD REW Skip/Search 7.PLAY/PAUSE/FUNCTION 8.REPEAT Button 9.CD FWD Skip/Search 10.USB Slot 11.Speaker net 12.FM Telescopic Antenna 13.TUNENG Knob 14.AUX-IN Jack 15.Volume Control 16.Band Selector(OFF/FM/AM/CD) 17.AC Mains 18.Battery Door POWER SOURCE This unit operates on 6 X ‘C’...
  • Page 7: Radio Reception

    Track Display will light steady. 10. To stop playing, press the CD STOP Button (#4). 11. When you wish to turn off the CD Player, set the Band Selector (#16) to the "OFF" position. CD PROGRAMMED PLAY This function allows the tracks to be played in a programmed sequence. Under CD stop condition, press the PROG/+10.
  • Page 8: Using Aux-In Jack

    USING AUX-IN Jack This CD features an aux line-in jack for connecting your iPod, MP3 player or other digital music player. Connect the headphone jack of your external device to the AUX IN jack located on the left side of this CD player (The connection cable is not included).
  • Page 9: Troubleshooting Guide

    TROUBLESHOOTING GUIDE Should you experience difficulties in the use of this player please refer to the following chart. PROBLEM POSSIBLE CAUSE REMEDY • The unit is disconnected from • Connect to an outlet. the AC outlet There is no display •...

Table of Contents