Setting Surface Controls - LG LRE30453SW Owner's Manual

SURFACE CONTROLS COOKING

SETTING SURFACE CONTROLS

When changing from a high heat setting to a lower heat
setting, the surface unit may stop glowing. This is normal.
To turn on a single surface unit
(Right Rear, Left Rear, Right Front)
1. Press ON/OFF for the desired
element position. The display will
flash
(If no further pads are pressed
within 10 seconds, the display will
disappear.)
2. Press
power level Hi or
3. Use the
desired power setting.
/
(Adjustable at any time while the
element is ON.)
4. To turn off the unit after cooking,
press ON/OFF once.
Note:
Each time a pad is pressed a beep will sound.
The power level decreases or increases by 0.5
from 9.0 through 3.0. (by 0.2 from 3.0 through
1.0)
Lo is the lowest power level available.
Note:
To scroll through the power levels quickly press and
hold the or key pads until the power level
desired is reached.
CAUTION
has cooled down sufficiently.
- The surface elements may still be hot and burns may
occur.
CAUTION
medium-high setting.
- Boilovers can cause smoking and greasy spillovers
may catch on fire.
.
once to turn on the
once for Lo.
/ to choose the
is continuously accessible.
- 9 -
To turn on a dual surface unit (Left Front)
1. Press ON/OFF. The display will
flash
(If no further pads are pressed within
10 seconds, the display will
disappear.)
2. Press ELEMENT SIZE as needed to
select the desired burner size. When
first selected, 12" size is ON. The
light above ELEMENT SIZE indicates
which size surface unit is on.
3. Press
level Hi or
4. Use the
power setting.
accessible. (Adjustable at any time
while the element is ON.)
5. To turn off the unit after cooking,
press ON/OFF once.
Note:
Each time a pad is pressed a beep will sound.
The power level decreases or increases by 0.5 from
9.0 through 3.0. (by 0.2 from 3.0 through 1.0)
Lo is the lowest power level available.
Note:
To scroll through the power levels quickly press and
hold the or key pads until the power level
desired is reached.
CAUTION
has cooled down sufficiently.
- The surface elements may still be hot and burns may
occur.
Recommended Surface Cooking
Settings
Recommended setting for the single & dual elements.
Setting Type of cooking
HIGH Start most foods, bring water to a
(8.5 – Hi) boil or pan broiling.
MEDIUM HIGH Continue a rapid boil, fry, or deep
(5.5 – 8.0) fat fry.
MEDIUM Maintain a slow boil, thicken sauces
(3.5 – 5.0) and gravies, or steam vegetables.
MEDIUM LOW Keep foods cooking, poach, or stew
(2.2 – 3.0) (2.8 or lower is a simmer setting).
LOW/SIMMER Keep warm, melt, or simmer.
(Lo – 2.0)
.
once to turn on the power
once for Lo.
/ to choose the desired
/ is continuously