: Enable unicast storm control
enable
: Disable unicast storm control
disable
<packet_rate>: Rate in fps (1, 2, 4, ..., 512, 1k, 2k, 4k, ..., 32768k)
Default Setting:
disable
Example:
Enable unicast storm control in 2fps
MGSW-28240F:/> QoS Storm Unicast enable 2
QoS Storm Multicast
Description:
Set or show the multicast storm rate limiter.
Syntax:
QoS Storm Multicast [enable|disable] [<packet_rate>]
Parameters:
: Enable multicast storm control
enable
: Disable multicast storm control
disable
<packet_rate>: Rate in fps (1, 2, 4, ..., 512, 1k, 2k, 4k, ..., 32768k)
Default Setting:
disable
Example:
Enable multicast storm control in 2fps
MGSW-28240F:/> QoS Storm multicast enable 2
QoS Storm Broadcast
Description:
Set or show the broadcast storm rate limiter. The limiter will only affect flooded frames, i.e. frames with a (VLAN ID, DMAC)
pair not present in the MAC Address table.
548
User's Manual of MGSW-28240F