Port Shaper Rate
Port Shaper Unit
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
: Click to undo any changes made locally and return to the previous page.
4.9.4 Port Classification
This page allows you to configure the basic QoS Ingress Classification settings for all switch ports. The Port Classification
screen in
Figure 4-9-4
appears.
Controls the rate for the port shaper. The default value is 500. This value is
restricted to 100-1000000 when the "Unit" is "kbps", and it is restricted to
1-3300 when the "Unit" is "Mbps".
Controls the unit of measure for the port shaper rate as "kbps" or "Mbps". The
default value is "kbps".
208
User's Manual of MGSW-28240F