Chevrolet 2011 Volt Owner's Manual page 352

9-50 Driving and Operating
In cold weather conditions, ice
may form around the charge port
door. The charge port door may
not open on the first attempt.
Remove ice from the area and
repeat attempting to open the
charge port door.
2. Open the rear hatch, lift the load
support floor covering (A), and
remove the charge cord (D).
It is located near the tire sealant
and compressor kit (C). Pull up
on the charge cord handle (D)
to release it from the handle
clip (E). Lift the charge cord up
and rearward to remove it from
the vehicle. The vehicle plug (B)
is stored as shown.
3. Plug the charge cord into the
electrical outlet. See Electrical
Requirements for Battery
Charging on page 9 56.
Verify that the charge cord
status indicators are both green.
See Charge Cord on page 9 54
for more information.
I n f o r ma t i o n P r o v i d e d b y :
4. Then plug in the vehicle plug
of the charge cord into the
charge port on the vehicle.
Verify that the charging status
indicator illuminates on top of
the instrument panel and a horn
chirp occurs. See Charging
Status Feedback on page 9 52
for more information.
5. To arm the charge cord theft
alert, lock the vehicle with the
RKE transmitter. This feature
can be disabled by a service
technician.