Brake System Warning; Light - Chevrolet 2011 Volt Owner's Manual

5-24 Instruments and Controls
The vehicle will not pass
this inspection if the OBD II
(On-Board Diagnostic) system
determines that critical emission
control systems have not been
completely diagnosed by the
system. The vehicle would
be considered not ready for
inspection. This can happen
if the 12 volt battery has
recently been replaced or
if the 12 volt battery has run
down. The diagnostic system
is designed to evaluate critical
emission control systems during
normal driving. This can take
several days of routine driving.
If this has been done and the
vehicle still does not pass the
inspection for lack of OBD II
system readiness, your dealer
can prepare the vehicle for
inspection.

Brake System Warning

Light

The vehicle brake system
consists of two hydraulic circuits.
If one circuit is not working, the
remaining circuit can still work to
stop the vehicle. For normal braking
performance, both circuits need to
be working.
If the warning light comes on, there
is a brake problem. Have the brake
system inspected right away.
This light comes on briefly when
the vehicle is turned on. If it does
not come on then, have it fixed so
it will be ready to warn if there is a
problem.
I n f o r ma t i o n P r o v i d e d b y :
If the light comes on and stays on,
there is a base brake problem.
{
WARNING
The brake system might not be
working properly if the brake
system warning light is on.
Driving with the brake system
warning light on can lead to a
crash. If the light is still on after
the vehicle has been pulled off
the road and carefully stopped,
have the vehicle towed for
service.