Chevrolet 2011 Volt Owner's Manual page 235

Installing the DVD Map Disc
Your dealer installs the map
database information on the HDD.
An updated map disc can be
used to update the map database
information. See Ordering Map
DVDs on page 7 76.
Before updating the map database
on the HDD, read the following
steps:
1. Turn the vehicle on.
2. Press VOL/ to turn the
system on.
3. Insert the map update disc into
the slot, label side up.
4. Press the Update screen button
when the Update Confirmation
screen displays.
5. Enter the Authentication Code,
then press Enter.
6. If the correct code is entered,
the system starts updating and
the status bar displays.
7. Press after the map
database update is completed.
If the application update file is
included in the disc, the application
update is also done.
I n f o r ma t i o n P r o v i d e d b y :
Infotainment System
Handling the DVD Map Disc
Handle the disc very carefully to
avoid contamination or flaws.
Signals might not read out
properly.
Use a soft cloth if the disc gets
soiled and gently wipe it from the
center of the disc to the outside.
Do not use cleaners or solvents.
Do not use the disc to rest on
while writing or drawing with any
writing utensil or attach a seal to
any of the sides of the disc.
Do not keep the disc in direct
sunlight, high temperatures,
or humidity.
Place the disc back into the
original case after use.
7-45