Table of Contents
Advertisement
running. Use a firm grip with thumbs
and fingers encircling the saw han-
dles.
(2) Do not over reach.
(3) Keep proper footing and balance at all
times.
(4) Do not let the nose of the guide bar
contact ground or other obstruction.
(5) Do not cut above shoulder height.
(6) Use devices such as special guide
bars that reduce the risks associated
with kickback.
(7) Only use replacement bars and chains
specified by the manufacturer.
16. Replacement Parts
when servicing use only identical replace-
ment parts.
17. Secure the workpiece so that it will not roll
or move suddenly during operation.
SAVE THESE INSTRUCTIONS
4
18. AVOID UNINTENTIONAL STARTING. Do
not carry the tool with finger on switch. Be
sure switch is in OFF position before
inserting battery cartridge.
19. The saw must not be left outdoors during
rain and it must not be used when wet.
20. Disconnect battery pack from tool or
place the switch in the locked or off posi-
tion before making any adjustments,
changing accessories, or storing the tool.
Such preventive safety measures reduce
the risk of starting the tool accidentally.
21. A battery operated tool with integral bat-
teries or a separate battery pack must be
recharged only with the specified charger
for the battery. A charger that may be suit-
able for one type of battery may create a
risk of fire when used with another bat-
tery.
22. Use battery operated tool only with specif-
ically designated battery pack. Use of any
other batteries may create a risk of fire.
Advertisement
Table of Contents
