Makita UC170D Instruction Manual page 6

Cordless pvc saw
Table of Contents

Advertisement

Replacement Saw Chain - A chain that complies with the kickback performance require-
ments of ANSI B175.1 when tested with specific saws. It may not meet the ANSI perfor-
mance requirements when used with other saws.
Saw Chain - A loop of chain having cutting teeth, that cut the PVC tubing and that is driven
by the motor and is supported by the guide bar.
Bumper - Front face of the saw head which maintains position while sawing.
Switch - A device that when operated will complete or interrupt and electrical power circuit
to the motor of the saws.
Lock-off Button - A movable stop that prevents the unintentional operation of the switch
until manually actuated.
IMPORTANT SAFETY INSTRUCTIONS FOR
CHARGER & BATTERY CARTRIDGE
1. SAVE THESE INSTRUCTIONS - This man-
ual contains important safety and operat-
ing instructions for battery charger.
2. Before using battery charger, read all
instructions and cautionary markings on
(1) battery charger, (2) battery, and (3)
product using battery.
3. CAUTION - To reduce risk of injury, charge
only
MAKITA
marked on the charger label. Other types
of batteries may burst causing personal
injury and damage.
4. Do not expose charger to rain or snow.
5. Use of an attachment not recommended
or sold by the battery charger manufac-
turer may result in a risk of fire, electric
shock, or injury to persons.
Table 1: RECOMMENDED MINIMUM AWG SIZE FOR EXTENSION CORDS FOR BATTERY CHARGERS
Length of Cord (Feet)
AWG Size of Cord
6
rechargeable
batteries
6. To reduce risk of damage to electric plug
and cord, pull by plug rather than cord
when disconnecting charger.
7. Make sure cord is located so that it will
not be stepped on, tripped over, or other-
wise subjected to damage or stress.
8. An extension cord should not be used
unless absolutely necessary. Use of
improper extension cord could result in a
risk of fire and electric shock. If extension
cord must be used, make sure:
a. That pins on plug of extension cord
are the same number, size, and shape
as those of plug on charger;
b. That extension cord is properly wired
and in good electrical condition;
c. That wire size is at least as large as
the one specified in the table below.
25
50
18
18
USC001-3
100
150
18
16

Advertisement

Table of Contents
loading

Table of Contents