Table of Contents
Advertisement
2
1. Lock-off button
2. Switch trigger
ASSEMBLY
1
1. Screws
2. Bolt
3. Sprocket guard
10
Switch action
002272
1
CAUTION:
•
Before inserting the battery cartridge into the tool,
always check to see that the switch trigger actuates
properly and returns to the "OFF" position when
released.
To prevent the switch trigger from being accidentally pulled, a
lock-off button is provided.
To start the tool, depress the lock-off button and pull the
switch trigger. Release the switch trigger to stop.
CAUTION:
•
Always make sure that the tool is switched off and the
battery cartridge is removed before carrying out any
work on the tool.
Installing or removing saw chain
002273
CAUTION:
2
•
Always wear protective gloves when installing or
removing the saw chain. Operation with bare hands may
result in personal injuries
3
•
Do not twist or bend the saw chain by force. Excessive
force from wrong direction may damage the saw chain.
•
Use only saw chain and guide bar with bar tip guard
designed for this saw.
•
In order to prevent kickback, do not remove the bar tip
guard or replace the guide bar with one without a bar tip
guard.
To remove the saw chain, loosen the screws with a screw-
driver. And then remove the sprocket guard.
Loosen the bolt with a hex wrench till the bolt rotates coun-
terclockwise almost once.
NOTE:
•
The saw chain can be replaced without removing the
guide bar from the tool. Therefore, it is not necessary to
let the bolt so loose that the guide bar is removed.
Advertisement
Table of Contents
