Panasonic Touchbook CF-45 Operating Instructions Manual page 9

Label-side up
Label on the top surface,
and inserting the shutter-
side headfirst.
Eject Button
NOTE
If [I accept the agreement] is selected, the [Certificate of Authenticity] will
appear. If [I don't accept the agreement] is selected, the Windows setup will
be aborted.
Input the Product Number (Key) written on the "Certificate of Authenticity"
5
located in the Windows
Press [Finish].
6
Input the correct time, date and time zone and press [Close] .
7
You can also complete these settings at a later time.
If you wish to complete the printer settings, press [Next]. If not, press [Cancel].
8
NOTE
Simply follow the on-screen instructions. You can also complete these set-
tings at a later time.
7
Create floppy disks
Prepare 2HD floppy disks and make sure they are not in the write-protected state, then
select [Start] - [Programs] - [Panasonic] - [Create FIRSTAID FD] and follow the on-
screen instructions. Place a label identifying the contents on each disk.
Name of created backup disk
FIRSTAID FD
(When the display for creating the BACKUP DISK is shown, create the disk by following the
on-screen instructions.)
CAUTION
Please store the floppy disks in a safe place. They will enable you to return your
computer to close to the condition at the time of purchase should any problems
occur.
When creating floppy disks, do not run any other application program.
When creating floppy disks and the message [Insufficient files to copy] is dis-
played, click [OK] and then contact Panasonic Technical Support.
While the floppy disk drive indicator is on, do not remove the floppy disk, power
down your computer or use the suspend or hibernation function (
pend/Hibernation Functions").
®
book that comes with this computer then press [Next].
"Sus-
9