Rbe (Rear Bass Enhancer); 4.1Ch Speaker Level; Visual Settings; Picture Eq - Sony XAV-712B Operating Instructions Manual

Listening Position
Sets the listening position and subwoofer position.
Unit status: Any status
Option Purpose
Front L () To set to front left.
Front R To set to front right.
Front To set to center front.
All To set to the center of your car.
OFF To not set the listening position.
Subwoofer: To select the subwoofer position.
Near, Normal (Available only when
(), Far [Subwoofer] is set to [ON], and
the listening position is set to
[Front L], [Front R], [Front], or
[All].)
Custom To precisely calibrate the
listening position. Before
starting, measure the distance
between your listening position
and each speaker.

RBE (Rear Bass Enhancer)

Unit status: During reception/ playback
Option Purpose
OFF (), RBE1, To select the mode to use the
RBE2, RBE3 rear speakers as subwoofers.
Crossover Filter
Unit status: During reception/ playback
Option Purpose
LPF: 50 Hz, 60 To select the cut-off frequency of
Hz, 80 Hz, 100 the subwoofer. (Available only
Hz (), 120 Hz when [Subwoofer] is set to [ON].)
HPF: OFF (), To select the cut-off frequency of
50 Hz, 60 Hz, the front/rear speakers.
80 Hz, 100 Hz,
120 Hz
Subwoofer To select the subwoofer phase.
Phase: (Available only when
Normal (), [Subwoofer] is set to [ON].)
Reverse
(): Front left
(): Front right
(): Center front
(): In the center of
your car
Subwoofer
Unit status: No source selected
Option Purpose
ON (), OFF To set the subwoofer connection
status.

4.1ch Speaker Level

Unit status: No source selected
Option Purpose
– To adjust the volume level of
each connected speaker.

Visual Settings

Dimmer
Unit status: Any status
Option Purpose
OFF To deactivate the dimmer.
Auto () To dim the display automatically
when you turn lights on.
(Available only when the
illumination control lead is
connected.)
ON To dim the display.
Dimmer Level
Unit status: Any status
Option Purpose
(–5 - +5) To select the brightness level
: 0
when the dimmer is activated.

Picture EQ

Adjusts the picture to suit the interior brightness of
the car. This setting is available only when the
parking brake is set.
Unit status: During video playback except USB
Video
Option Purpose
Dynamic (), To select the picture quality.
Standard,
Theater, Sepia
Custom 1, To customize the picture quality.
Custom 2
25
GB