Figure E-5. Fis Data Link (Excluding Gdl90 - Garmin GMX 200 Installation Manual

GMX 200 MFD
3
RS232 OUT 3
SERIAL GROUND 3
NOTES:
1. ALL WIRES 24 AWG OR LARGER UNLESS OTHERWISE SPECIFIED.
2. AT GMX 200, CONNECT SHIELD GROUNDS TO THE CONNECTOR BACKSHELL-- THE SHIELD LEADS
MUST BE LESS THAN 3.0 ". CONNECT OTHER SHIELD GROUNDS TO AIRCRAFT CHASSIS WITH AS
SHORT A CONDUCTOR AS PRACTICAL.
3. RS232 PORTS 1, 2, 4 OR 5 MAY BE USED INSTEAD OF PORT 3.
4. GMX 200 MUST BE CONFIGURED FOR THE FIS SOURCE ON PORT 3 (OR WHICHEVER
PORT FIS SOURCE IS CONNECTED TO), AND THE FIS DATA LINK FUNCTION MUST BE ENABLED.
IF GDL 69A IS INSTALLED, THE XM SATELLITE RADIO FUNCTION MUST ALSO BE ENABLED FOR THE
AUDIO FUNCTION TO BE AVAILABLE.
GMX 200 Installation Manual
190-00607-04
P2001
RS232 IN 3 7
6
25
s

Figure E-5. FIS Data Link (excluding GDL90)

WSI GARMIN
AV-300/350 GDL 69/69A
P1 P691
2
2 3 RS-232 OUT
5 6 RS-232 IN
24 4 13 SIGNAL GROUND
4
4 4
DATA LINK
RECEIVER
Page E-7
Revision F