Electrical Connection; Disposing Of Packaging Material; Transportation Of The Product - Beko EV 7103 User Manual

2.7 Electrical connection

Connect the product to a grounded outlet
protected by a fuse complying with the values
in the "Technical specifications" table. Our
company shall not be liable for any damages
that will arise when the product is used
without grounding in accordance with the local
regulations.
• Connection must comply with national
regulations.
• Power cable plug must be within easy
reach after installation.
• The voltage and allowed fuse or breaker
protection are specified in the "Technical
specifications" section. If the current
value of the fuse or breaker in the house
is less than 16 Amps, have a qualified
electrician install a 16 Amp fuse.
• The specified voltage must be equal to
your mains voltage.
• Do not make connections via extension
cables or multi-plugs.
B
WARNING
Damaged power cables must be replaced by
the Authorized Service Agents.
2.8 First use
Before starting to use the product, make sure
that all preparations are made in accordance
with the instructions in sections "Important
safety instructions" and "Installation".
To prepare the product for washing laundry,
perform first operation in Cotton-90
programme. Before starting the programme,
put max. 100 g of powder anti-limescale
into the main wash detergent compartment
(compartment nr. II). If the anti-limescale
is in tablet form, put only one tablet into
compartment nr. II. Dry the inside of the
bellow with a clean piece of cloth after the
programme has come to an end.
8 / EN
C
INFORMATIONS
Use an anti-limescale suitable for the
washing machines.
Some water might have remained in the
product due to the quality control processes
in the production. It is not harmful for the
product.

2.9 Disposing of packaging material

Packaging materials are dangerous to children.
Keep packaging materials in a safe place away
from reach of the children.
Packaging materials of the product are
manufactured from recyclable materials.
Dispose of them properly and sort in
accordance with recycled waste instructions.
Do not dispose of them with normal domestic
waste.

2.10 Transportation of the product

Unplug the product before transporting
it. Remove water drain and water supply
connections. Drain the remaining water in the
product completely; see, "Draining remaining
water and cleaning the pump filter". Install
transportation safety bolts in the reverse
order of removal procedure; see, "Removing
the transportation locks".
C
INFORMATIONS
Never move the product without the
transportation safety bolts properly fixed in
place!
2.11 Disposing of the old product
Dispose of the old product in an
environmentally friendly manner.
Refer to your local dealer or solid waste
collection centre in your area to learn how to
dispose of your product.
For children's safety, cut the power cable and
break the locking mechanism of the loading
door so that it will be nonfunctional before
disposing of the product.
Washing Machine / User's Manual