Starting The Programme; Progress Of Programme; Cancelling The Programme - Beko EV 7103 User Manual

4.9 Starting the programme

Press Start / Pause button to start the
programme. Programme follow-up light
showing the startup of the programme will
turn on.

Progress of programme

Progress of a running programme can be
followed from the Programme Follow-up
indicator with the lights "Running" and "End/
Cancel".
C
INFORMATIONS
If the machine does not pass to the spinning
step, automatic unbalanced load detection
system might have been activated due to the
unbalanced distribution of the laundry in the
machine.
4.10 Loading door lock
There is a locking system on the loading
door of the machine that prevents opening
of the door in cases when the water level is
unsuitable.
If you want to open loading door when the
machine is in use, press "Start / Pause" button
to pause the machine. "Door Open" light will
start flashing when the machine is switched
to Pause mode. Machine checks the level of
the water inside. If the level is suitable, "Door
Open" light illuminates steadily within 1-2
minutes and the loading door can be opened.
If the level is unsuitable, "Door Open" light
turns off and the loading door cannot be
opened. If you are obliged to open the loading
door when the "Door Open" light is off, you
have to cancel the current programme; see
"Cancelling the programme".
Switching the machine to pause mode
Press the "Start / Pause" button to switch the
machine to pause mode while a programme is
running. "Running" light starts flashing on the
Programme Follow-up indicator to show that
the machine has been switched to the pause
mode.
When the loading door is ready to be opened,
"Door Open" light will illuminate continuously.
17 / EN
Adding or taking out laundry
Press "Start / Pause" button to switch the
machine to pause mode. When the machine
is switched to pause mode, "Running" light
flashes. Wait until the Loading Door can be
opened. Open the Loading Door and add or
take out the laundry.
Close the Loading Door. Press "Start / Pause"
button to start the machine.
C
INFORMATIONS
The door can be opened if the water level
is suitable. Door open symbol flashes until
the loading door gets ready to be opened.
The symbol's light is steady when the door is
ready to open. You can open the door to add/
take out laundry.

4.11 Cancelling the programme

To cancel the programme, turn the Programme
Selection knob to select another programme.
Previous programme will be cancelled. "End/
Cancel" light will flash continuously to notify
that the programme has been cancelled.
C
INFORMATIONS
If you start a new programme after
cancelling the previous one, this new
programme will start without draining the
water in the machine.
If you must certainly open the loading
door when the "Door Open" light is off, you
need to use "Spin+Pump" programme. See
"Spin+Pump"
Re-spinning the laundry
Unbalanced load control system can prevent
spinning because of unbalanced load of
laundry in the machine. If you would like to
spin again:
Rearrange the laundry in the machine. Select
Spin+Pump programme and press "Start /
Pause" button.
Washing Machine / User's Manual