Eyeball Diverter Positions - Pentair Pool Products Kreepy Kadet Owner's Manual

Figure 15
Outer Ring
IMPORTANT: The eyeball diverter must fit snugly into the eyeball fitting. Some eyeball fittings,
like Aqua Leader or Olympic, may be too large for the eyeball diverter. In this situation, use the outer
ring supplied with your Kreepy Kadet to adjust for the discrepancy in size.
• S n ap the outer ring onto the eyeball dive rter and position it in the fi rst gro ove as shown in Fi g u re 15.
• I n s e rt the eyeball dive rter/outer ring assembly into the eyeball fitting in the re t u rn line. See Fi g u re 15.
• Install the lock (retaining) ring and tighten. See Figure 15.

Eyeball Diverter Positions

Position the diverter opening to redirect the return line water flow so it does not interfere with the
cleaner's movement.
Common Diverter Positions are:
• Flow directed downward.
• Flow directed along the tile line, (side of pool along water line).
• Flow directed against cleaner's hose.
1. To help cleaner get out of difficult areas.
2. To prevent cleaner from getting into difficult areas.
If the Eyeball or Eyeball with outer ring do not fit your pool, use the Wire Diverter accessory available
for purchase from your dealer.
After installing the eyeball diverter, turn the pool pump on. Your cleaner should begin moving across
the pool floor vacuuming up debris in its path.
Eyeball Diverter
Snap into
this Groove
Pool Deck
Eyeball
Fitting
Eyeball
Diverter with
Outer Ring
Attached
Lock (Retaining) Ring
Pool Wall
Return
Line