MANUAL TUNING
To reactivate AFT
(automatic fine tuning)
Repeat from the
beginning and select
"ON" in step 7.
12
Manual Fine-Tuning
Normally, the AFT (automatic fine-tuning) is already operating.
However, if the picture is distorted, you can use the manual fine
tuning function to obtain better picture reception.
1
Press MENU to display the main menu.
Select "PRESET" with >+ or ?– and press OK.
2
The PRESET menu appears.
Select "MANUAL TUNING" with >+ or ?– and press OK.
3
The MANUAL TUNING menu appears.
Select "PR" with >+ or ?– and press OK.
4
5
Select programme position you want to manually fine-tune
with >+ or ?– and press OK.
Select "AFT" with >+ or ?– and press OK.
6
Select "OFF" with >+ or ?– and press OK. (See Fig. 14.)
7
Fine-tune the channel with >+ or ?– so that you get the best
8
TV reception. As you press the cursor buttons, the frequency
changes from – 128 to + 127.
9
After fine tuning, press OK.
Now the fine-tuned level is stored.
10 Repeat steps 4 to 9 to fine-tune other channels.
11 Press MENU to return to TV picture.
MANUAL TUNING
PR : 01
SYS :
B / G
CH :
C
0 3
LABEL :
– – – – –
AFT :
OFF
SELECT
AND PRESS OK
Fig. 14