Additional Presetting Functions
3
2
1
PROGRAMME
EXCHANGE
2
1
3
6
4
5
8
9
7
0
C
PROGR
+
+
1
_
_
1
SAT
+
MENU
_
OK
VTR 1-2-3 MDP
+
PROGR
_
RM-831
If you have made a
mistake
Press ≅ to go back to
the previous position
To go back to main
menu
Keep pressing ≅.
10
This section shows you additional presetting functions such as
exchanging or skipping programme positions, captioning a station
name, and manual fine-tuning.
You can skip this section, if not needed.
Before you begin
•
Check that the Full Function side of the Remote
Commander is visible.
•
Locate the Menu operation buttons.
Exchanging Programme Positions
With this function, you can exchange the programme positions to a
preferable order.
1
Press MENU to display the main menu.
Select "PRESET" with >+ or ?– and press OK.
2
The PRESET menu appears.
Select "PROGRAMME EXCHANGE" with >+ or ?– and press
3
OK.
The PROGRAMME EXCHANGE menu appears. (See Fig. 9.)
Using >+ or ?–, select the programme position you want to
4
exchange with another and press OK.
Using >+ or ?–, select the programme position to be exchanged
5
and press OK. Now the two programme positions have been
exchanged.
6
Repeat steps 4 and 5 to exchange other programme positions.
7
Press MENU to return to TV picture.
Tuning in to a Channel Temporarily
You can tune in to a channel temporarily, even when it has not
been preset. Use the buttons on the Full-Function side of the
Remote Commander.
1
Press C on the Remote Commander. For cable channels, press C
twice.
The indication "C" ( "S" for cable channels) appears on the screen.
(See Fig. 10.)
2
Enter the double-digit channel number using the number buttons
(e.g. for channel 4, first press 0, then 4).
The channel appears.
However, the channel will not be stored.
PROGRAMME EXCHANGE
0
1 B / G C 3
0
– – – – –
– – – – – – – – – – – – –
MOVE PR 0 1 TO PR
– –
Fig. 9
C
Fig. 10