Pip(Picture In Picture) - Sony KP-46S3K Operating Instructions Manual

PIP (Picture In Picture)
1 2 3
4 5 6
7 8 9
0 C
PROGR
+ +
1
_ _
1
SAT
+
MENU
_
OK
VTR 1-2-3 MDP
+
PROGR
_
RM-831
1
2
Note
RGB input source
cannot be displayed in
PIP.
With this function you can display a "PIP screen" (small picture)
within the main TV picture. In this way you can watch or monitor
the video output from any connected equipment (for example from
a VTR) while watching TV or vice versa. For information about
connection of other equipment, refer to page 22.
Switching PIP on and off
Press .
The PIP screen will be displayed. The PIP picture will come from
the source chosen when the TV was last used.
To Switch PIP off
Press again.
Selecting a PIP source
Press Χ.
The symbol Χ will be displayed at the bottom, left-hand corner of
the screen.
Press repeatedly until the desired PIP source is indicated (e.g.
TV, AV1, AV2, YC2, AV3, YC3, AV4, YC4).
Note
If no video source has been connected, the PIP picture will be
noisy.
Swapping screens
Press a.
The main screen will switch the picture with the PIP screen.
B
A
Notes
• If a TV programme is on the PIP screen and a video source
on the main picture, and you want to change channels, first
press Χ and then the programme number buttons or
PROGR +/–.
• Swapping screens takes about 2 seconds after pressing
a .
• After swapping screens if the colour systems of the main
and PIP pictures are different, the PIP picture first appears
in black and white and then in colour.
Changing the position of the PIP
Press A repeatedly to change the position of the PIP screen
within the main screen. There are four different positions available.
PIP
Main TV
picture
A
B
GB
17