Table of Contents
Advertisement
LED
You can turn off the LED backlight for the buttons. [LED] [On] / [Off].
Screen Saver
Using the Screen Saver function you can set the
screen to turn off after 3 or 5 minutes once the
camera turns on and starts recording. This is
convenient to prevent the display from distracting
the driver.
[Screen Saver] [Off] / [3 min] / [5 min]
License Plate
You can provide your license plate number here.
This number will be stamped at the bottom right
corner along with the time and date.
Push "OK" button and use the "UP" and "DOWN" buttons to select the appropriate first letter or digit.
Then press "MENU" to go to the next letter or digit. After you setup your plate press "OK" to save your
plate number.
[Plate] - [Ok] [Mode] [Down]
Language
Use this setting to adjust the menu to your preferred language. *Language+ *English+ ....*your foreign
language] Press "OK" Button to process.
Auto Power Off
Once the desired time is set, the camera shuts down if the camera is powered on, but is idle and not
recording.
MENU Button [Auto power off] [Off] / [3 Min] / [5 Min] / [10Min]
Format
This function deletes all data in the memory card
including protected data.
[Format] [No] / [Yes]. Press [Ok] button to format.
Default Setting
This function resets all settings to default factory setting.
[Default Setting] [No] / [Yes]
P a g e
| 7
Hide quick links:
Advertisement
Table of Contents
