Table of Contents
Advertisement
For USA use NTSC.
[TV OUT] [NTSC] / [PAL]
Date & Time
Adjust the current date and time.
[Date & Time] select Year, Month, Day, Hour,
Minute - Press [OK] to save setting.
Select year using the MENU button and set the year
using the UP and DOWN button. Then select the
month using the MENU button and set the current
month using the UP and DOWN buttons. Follow the
above steps to set the day, hour, and minute and
press OK.
GPS (optional)
When module is plugged into unit - set to ON, else
keep the setting OFF.
[GPS] [ON] / [OFF]
Time Zone
[Time Zone] [-12] / [-11] /..../ [+11] / [+12]
WARNING: Setting up the correct time zone is
very important for the proper location to be
displayed on the MAP!
1. Connect the GPS Module to the GPS Port (#7).
2. Go to the "MENU" (button #1).
3. Scroll down (button #3) to GPS and press "OK" button (#2) to confirm.
4. Switch the GPS from OFF to ON using button #3 and press "OK" (#2) to confirm. The green LED (#10)
and the satellite symbol on the LCD starts to blink (it glows continuously when you start driving and
the satellite signal is detected).
5. Scroll down to the "Time Zone" (button #3) and press "OK" to confirm.
6. Using the "UP" and "DOWN" buttons (#4 and #5") set proper time zone for your region (New York -
5). Press "OK" (#2) button to confirm. Press "MENU" button to exit from the menu mode.
Beep
ON/OFF function for Power-ON "beep" signal.
[Beep] [On] / [Off]
P a g e
| 6
Hide quick links:
Advertisement
Table of Contents
