Event; Motion Sensor (Set To Off Under Normal Operation); G-Sensor (Gravity Sensor) (Set To Off Under Normal Operation); Tv Out - Wheel Witness HD PRO Owner's Manual

Setting this function to OFF turns off the splitting function as well as the LOOP function. This way the
card records until FULL, and then STOPS recording, displaying the message "Card Full".
For normal operating conditions, we suggest you use 2, 5 or 10min.
[Record Time] [2min] / [5min] / [10 min] / [Off]

Event

In case of emergency or for some other reason when you want to save the recorded moment, simply
press the "MENU" button (#1) while camera is recording. The camera displays the "!" symbol on the LCD
Display and the current and previous file (2 min, 5 Min or 10 minutes – depending on your setting) will
be locked and saved as a "READ ONLY" file. This will prevent the camera from overwriting it the next
time it is under cyclic recording. You can browse the SD Card on your computer or connect the camera
via USB to view the file.
WARNING: FORMATTING THE SD CARD WILL ERASE ALL THE INFORMATION INCLUDING FILES SAVED
IN THE EVENT FOLDER.

Motion Sensor (Set to OFF under normal operation)

The motion detector function is used when the
vehicle is stationary or under special application
options. If you have the camera hardwired, you can
set the motion detector to ON, and when a motion
is visible in the field of view, the camera records the
set time. It creates a separate EVENT folder and
stores the files there. These files are saved and are
not overwritten when the camera files loop.
This function should be turned OFF under normal
operation (when driving)!
[Motion detect] [Off] / [5s] / [10s] / [30s] / [60s]

G-Sensor (Gravity Sensor) (Set to OFF under normal operation)

Same as the motion detector, the G-Sensor is used when the vehicle is stationary or under special
application. When there is a collision or a sudden change in XYZ axis, the G-Sensor or Gravity Sensor
determines the direction of the collision and records the event. It creates a separate EVENT folder and
stores the files there. These files are saved and are not overwritten when the camera files loop.
Adjust the sensitivity parameter of the sensor so that the camera does not automatically lock all the
recorded videos.
MENU Button [G-Sensor] [High] / [Mid] / [Low] / [Off]

TV Out

This setting can be adjusted when you use the AV cable or HDMI cable to connect the camera to your TV
(AV and HDMI cables are not included.) (You can use the playback feature to display it on your TV).
P a g e | 5