Led Setting; G-Sensor (Gravity Sensor) - (Set To Off By Default); Motion Sensor - (Set To Off By Default) - Wheel Witness CMPRO Owner's Manual

LED Setting
You can turn off the LED backlight for the buttons. [LED] [On] / [Off].
G-Sensor (Gravity Sensor) – (Set to OFF by default)
Same as the motion detector, the G-Sensor is used when the vehicle is stationary or under special
application. When there is a collision or a sudden change in XYZ axis, the G-Sensor or Gravity Sensor
determines the direction of the collision and records the event. It creates a separate EVENT folder and
stores the files there. These files are saved and are not overwritten when the camera files loop.
Adjust the sensitivity parameter of the sensor so that the camera does not automatically lock all the
recorded videos.
[G-Sensor] [High] / [Medium] / [Low] / [Off]
This should be set to OFF under normal operation while you drive, otherwise the camera
may freeze or behave unexpectedly.
Motion Sensor – (Set to OFF by default)
The motion detector function is used when the vehicle is stationary or under special application
options. If you have the camera hardwired, you can set the motion detector to ON, and when a motion
is visible in the field of view, the camera records the set time. It creates a separate EVENT folder and
stores the files there. These files are saved and are not overwritten when the camera files loop.
This function should be turned OFF under normal operation (when driving)!
[Motion detect] [Off] / [On]
This should be set to OFF under normal operation while you drive, otherwise the camera
may freeze or behave unexpectedly.
P a g e | 7