System Menu Parameters & Functions; Utility - Kawai MP11 Owner's Manual

SYSTEM Menu parameters & functions
1

Utility

1. System Tuning
This parameter sets the global master tuning of the MP11 in
0.5Hz increments.
* The default setting is A = 440.0 Hz
3. Knob Action
This parameter determines the adjustment behaviour of the
four control knobs (A, B, C, D).
Mode Description
Normal Value changes immediately when control knob is turned.
Value does not change until control knob 'catches' the
Catch previously stored value, thus preventing unexpected
jumps in parameter values.
* The default setting is Normal.
5. LCD Contrast
This parameter adjusts the contrast of the LCD display.
The contrast becomes sharper as the value increases.
* The default setting is 5.
7. Input Level
This parameter adjusts the gain of the MP11's LINE IN jacks.
If the output level of the external device is too high, reduce the value
of this parameter. Alternatively, if the output is too low, increase
the value of this parameter.
* The default setting is 0 dB.
9. Lock SW Mode
This function determines which controls will be locked when
the LOCK ( ) button is pressed.
Mode Description
Panel The main control panel will be locked.
Bend The pitch bend wheel will be locked.
The modulation wheel will be locked.
Mod.
The centre pedal will be locked.
Center
The left pedal will be locked.
Left
The expression pedal (EXP) will be locked.
EXP
* The default setting is Panel Lock.
MP11_EN_20140421_R102.indd 99
2. Eff. SW Mode
: 427.0 ~ 453.0 Hz
value
This function determines whether the ON/OFF state of the EFX,
REVERB, and AMP buttons is recalled when selecting sounds.
Mode
Preset
Temp.
Fixed
* The default setting is Preset.
4. Volume Fader Action
,
normal catcH
This parameter determines the adjustment behaviour of the
section volume faders.
Mode
Normal
Catch
* The default setting is Normal.
6. LCD Reverse
: 1 ~ 10
value
This parameter inverts the black and white pixels of the LCD
display, which may improve visibility in certain situations.
* The default setting is OFF.
8. Audio Out Mode
: –18 dB ~ +18 dB
value
This parameter allows the MP11's LINE OUT signal to be
changed from stereo to dual-mono.
This may be useful in certain situations, allowing one output to be
used for a monitor speaker and the other to be plugged into the
mixing console.
Mode
Stereo
2xMono
6
types
* The default setting is Stereo.
* Stereo EFX such as AutoPan will be turned OFF when 2xMono is selected.
10. Auto Power Off
This parameter determines the period of inactivity that should
pass before the MP11 automatically turns OFF.
Value
Off
30 mins.
60 mins.
120 mins.
* The default setting for this parameter depends on the market region.
Description
ON/OFF state is recalled when selecting sounds.
ON/OFF state is not recalled when selecting sounds.
ON/OFF state and Eff. Setting are not recalled when
selecting sounds.
Description
Volume changes immediately when fader is moved.
Volume does not change until fader 'catches' the
previously stored volume value, thus preventing
unexpected volume jumps.
Description
The Line-out signal is normal stereo.
The Line-out signal is mono on both jacks.
o , 30
ff mins
Description
The Auto Power Off function is disabled.
The MP11 will turn off after 30 minutes of inactivity.
The MP11 will turn off after 60 minutes of inactivity.
The MP11 will turn off after 120 minutes of inactivity.
, .,
preset temp fixed
,
normal catcH
o , o
n ff
s , 2 m
tereo x ono
., 60 ., 120 .
mins mins

2014/04/22 8:49:18