Table of Contents
Advertisement
Format
This function allows a USB memory device to be formatted, erasing all stored data.
1. Selecting the Format function
Press the CURSOR buttons then the +/YES button or F4 function
button (NEXT) to select the format function.
Press the –/NO or F1 function button (BACK) to return to the
previous screen.
2. First confirmation prompt
The first confirmation prompt will be shown in the LCD display.
Press the +/YES button or F4 function button (EXEC) to select
the proceed with the format function.
Press the –/NO or F1 function button (BACK) to return to the
previous screen.
3. Final confirmation prompt
A final confirmation prompt will be shown in the LCD display.
Press the +/YES button or F4 function button (EXEC) to select
the proceed with the format function.
Press the –/NO or F1 function button (BACK) to return to the
previous screen.
MP11_EN_20140421_R102.indd
97
The Format function will erase all data stored on the connected USB memory device.
Exercise caution when using this function in order to prevent accidental data loss.
2014/04/22
8:49:17
Advertisement
Table of Contents
