Table of Contents
Advertisement
Transmit
The Transmit category parameters are all SYSTEM parameters. These parameters are memorised automatically and
therefore do not need to be stored to each SETUP.
1. Transmit System Exclusive
This parameter determines whether or not System Exclusive
(SYSEX) data will be transmitted to an external MIDI device.
* For more information about System Exclusive data transmitted by the
MP11, please refer to page 127.
MMC
The MMC category parameters are all SYSTEM parameters. These parameters are memorised automatically and
therefore do not need to be stored to each SETUP.
1. Transmit MMC
This parameter determines whether or not the MP11's recorder
control buttons will transmit MMC (MIDI Machine Control)
data.
3. MMC Commands
These parameters allow MMC or Realtime commands to be assigned to the MP11's six recorder control buttons.
* By default, the main MMC commands should be correctly mapped to the MP11's recorder control buttons.
A ssignable recorder control commands
MMC Commands
01
STOP
02
PLAY
03
DEFERRED PLAY
04
FAST FORWARD
05
REWIND
06
RECORD STROBE
07
RECORD EXIT
Realtime Commands
FA
Realtime START
FB
Realtime CONTINUE
FC
Realtime STOP
MP11_EN_20140421_R102.indd
55
o
, o
n
ff
o
, o
n
ff
08
RECORD PAUSE
09
PAUSE
0A
EJECT
0B
CHASE
0C
COMMAND ERROR RESET
0D
MMC RESET
2. Transmit Recorder
This parameter determines whether or not data will be
transmitted to an external MIDI device when playing internal
recorder songs.
2. MMC Dev. ID
This parameter determines the device ID of the MMC (MIDI
Machine Control).
13
mmc commands
R ecorder control buttons
The illustration below indicates the names of the six recorder
control buttons:
RESET
REC
REW
A
B
o
, o
n
ff
: 0 ~ 127
value
, 3
realtime commands
PLAY
FF
2014/04/22
8:49:00
Advertisement
Table of Contents
