System Menu Pages; Overview Of The System Menu - Kawai MP11 Owner's Manual

Overview of the SYSTEM Menu
The SYSTEM menu contains parameters and settings that affect the general operation of the MP11. These settings
are grouped into six categories: Utility, Pedal, MIDI, Offset, User Edit, and Reset. SYSTEM parameters will be
memorised automatically when instrument is turned OFF.
 SYSTEM Menu parameters
Category Parameters
System Tuning, Eff. SW Mode, Knob Action, Volume Fader Action, LCD Contrast, LCD Reverse,
Utility
Input Level, Audio Output Mode, Lock SW Mode, Auto Power Off
Right Pedal Mode, Center Pedal Mode, Left Pedal Mode, Half Pedal Adjust, Right Pedal Polarity,
Center Pedal Polarity, Left Pedal Polarity, EXP Pedal Curve, EXP Pedal Polarity, EXP Pedal Calibrate,
Pedal
Right Pedal Calibrate
System Channel, Key to MIDI, Key to USB, MIDI to MIDI, MIDI to USB, USB to MIDI, SETUP Program, SETUP Bank,
MIDI
SETUP Volume, SETUP Knobs, Receive Mode, PIANO Channel, E.PIANO Channel, SUB Channel
Offset EQ Offset On/Off, Reverb Offset, EQ Offset Low, EQ Offset High, EQ Offset Mid1, EQ Offset Mid2
User Touch Curve, User Temperament, User Key Volume, User Stretch Tuning
User Edit
Reset One Sound, All Sound, One Setup, All Setup, System, Power On, Recorder, Factory
 E ntering the SYSTEM Menu
Press the SYSTEM button.
The LED indicator for the SYSTEM button will turn ON, and the
SYSTEM Menu will be shown in the LCD display.
 S electing the SYSTEM parameter category
Press the CURSOR buttons to select, and then the F4 function
button (NEXT) or +/YES button to enter the desired category.
 A djusting SYSTEM parameters
Turn the four control knobs (A, B, C, D) to adjust the parameters
assigned to those knob.
Parameters can also be adjusted by using the CURSOR buttons
to move the selection cursor, and +/YES or –/NO buttons to
increase or decrease the value of the selected parameter.
Press the F2 and F3 function buttons to cycle through the

SYSTEM menu pages.

* The CURSOR  buttons can also be used to cycle through pages.
* The adjusted SYSTEM parameters will be memorised automatically.

MP11_EN_20140421_R102.indd 98
LED indicator ON:
SYSTEM menu is selected
or
Select category
2014/04/22 8:49:17