Jeep Compass 2015 Owner's Manual page 292

290 UNDERSTANDING YOUR INSTRUMENT PANEL
• Jump backward in the current track by pushing and
holding the << RW button. Holding the << RW button
long enough will jump to the beginning of the current
track.
• Jump forward in the current track by pushing and
holding the FF>> button.
• A single push backward << RW or forward FF>> will
jump backward or forward respectively, for five sec-
onds.
• Use the << SEEK and SEEK >> buttons to jump to the
previous or next track. Pushing the SEEK >> button
during play mode will jump to the next track in the
list, or push the VR button and say Next or Previous
Track.
• While a track is playing, push the INFO button to see
the associated metadata (artist, track title, album, etc.)
for that track. Pushing the INFO button again jumps to
the next screen of data for that track. Once all screens
have been viewed, the last INFO button push will go
back to the play mode screen on the radio.
• Pushing the REPEAT button will change the audio
device mode to repeat the current playing track or
push the VR button and say Repeat ON or Repeat
Off.
• Push the SCAN button to use iPod®/USB/MP3 de-
vice scan mode, which will play the first ten seconds of
each track in the current list and then forward to the
next song. To stop SCAN mode and start playing the
desired track, when it is playing the track, push the
SCAN button again. During Scan mode, pushing the
<< SEEK and SEEK >> buttons will select the previous
and next tracks.
I n f o r ma t i o n P r o v i d e d b y :