Table of Contents
Advertisement
Each command is listed, in detail, in the following sections.
config discovery trap_ip
Purpose
Syntax
Description
Parameters
Example usage:
To assigned IP address of the Web Configuration Utility to receive
trap message:
Used to configure an IP address of the trap
recipient of Web Management Utility to the
Switch.
config discovery trap_ip ipaddress
<ip_address> {vid <vlan_id>}
The command is configure an IP address of the
trap recipient of Web Management Utility to the
Switch.
<ip_address>
Management Utility.
<vlan_id> - Specific the 802.1Q VLAN ID of Web
Management Utility. The range is between 1 to
4094.
Figure 82. config discovery trap_ip command
-
IP
address
79
of the Web
Advertisement
Table of Contents
