Backup Setting; Reset Setting - D-Link DGS-1224T Manual

Backup Setting

The backup tools help you to backup the current setting of the Switch.
Once you need to backup the setting, press the "Backup" button to
save the setting.
To restore a current setting file to the device, you must specify the
backup file and press "Restore" button to proceed the setting of the
recorded file.
Figure 40. Backup Setting
Note: when restoring a recorded file, the current password will not be erased.

Reset Setting

The Factory Reset button helps you to reset the device back to the
default setting from the factory. Be aware that the entire configuration
will be reset, the IP address of the device will be set to default setting
192.168.0.1.
Figure 41. Reset Setting
48