Table of Contents
Advertisement
create smac (802.1Q VLAN)
Purpose
Syntax
Description
Parameters
Example usage:
To create a unicast MAC FDB entry:
Figure 115. create static MAC addres to FDB (port-based VLAN)
Used to create a static entry to the unicast MAC
address forwarding table (database).
[mac <macaddress> port <port no.> vid <vid>
| idx <mac address index list on fdb>]
This command allows you to designate a range
of ports as being connected to multicast-enabled
routers. This will ensure that all packets with
such a router as its destination will reach the
multicast-enabled router − regardless of protocol,
etc.
mac <macaddress> - The MAC address that will
be added to the forwarding table.
port
<port
corresponding to the MAC destination address.
The Switch will always forward traffic to the
specified device through this port.
vid <vid> - Specific the 802.1Q VLAN ID to the
port.
idx <mac address index list on fdb> - Added to
the forwarding table for fdb list.
109
no.>
-
The
port
number
Advertisement
Table of Contents
