Cube Dj - ICON Cube Owner's Manual

USB 2.0 CONNECTOR
Connect it with the provided USB cable to your Mac/PC's USB connector.
Your Mac/PC must have a USB2.0 connector in order to run the full speed
of Cube 4 Nano.
LINE OUTPUTS 1/2
"
These are unbalanced analog outputs on standard 1/4 TS connectors at
+6dBU line level.
S/PDIF COAXIAL I/O CONNECTORS
S/PDIF digital input and output on coaxial RCA connectors. The digital input
is selected via the Cube 4 Nano's software control panel, while the digital
output will be sent to the coaxial.
MIDI I/O CONNECTORS
MIDI input and output on standard 5-pin DIN connectors
POWER SUPPLY CONNECTOR
Cube 4 Nano is USB-bus powered. If your computer does not supply
sufficient power, connect a ICON 5VDC power supply adapter to this jack.
(Note: You can get the power adapter from ICON distributors/dealers near you)
Rear Panel - Cube DJ
USB 2.0 CONNECTOR
Connect it with the provided USB cable to your Mac/PC's USB connector.
Your Mac/PC must have a USB2.0 connector in order to run the full speed of

Cube DJ.

LINE INPUTS 1/2 & 3/4
These are unbalanced analog inputs on RCA connectors at –10dB line level.
LINE OUTPUTS 1/2 & 3/4
These are unbalanced analog outputs on RCA connectors at +6dBU line level.
MIDI I/O CONNECTORS
MIDI input and output on standard 5-pin DIN connectors