Cube G - ICON Cube Owner's Manual

Rear / Side Panel - Cube G
R L R L
Out In
USB Line Outs Line In
S/PDIF
Midi I/O
Out In
USB 2.0 CONNECTOR
Connect it with the provided USB cable to your Mac/PC's USB connector.
Your Mac/PC must have a USB2.0 connector in order to run the full speed
of Cube G.
LINE INPUTS 1/2
These are unbalanced analog inputs on standard 1/4 TS connectors at
"
–10dB line level.
LINE OUTPUTS 1/2
These are unbalanced analog outputs on standard 1/4 TS connectors at
"
+6dBU line level.
S/PDIF COAXIAL I/O CONNECTORS
S/PDIF digital input and output on coaxial RCA connectors. The digital
input is selected via the Cube G's software control panel, while the digital
output will be sent to the coaxial.
MIDI I/O CONNECTORS
MIDI input and output on standard 5-pin DIN connectors