Round End/Keyhole Buttonhole; Adjusting The Buttonhole Width - Janome 8048 Instruction Book

Round end/Keyhole buttonhole

q w e
Machine setting
q Pattern
or
w LED display
e Foot
R: Automatic buttonhole foot
The sewing sequence is the same as square
buttonhole .
w
Refer to pages 44,46 for sewing instruction.
q Starting point
w End point
q
w
q

Adjusting the buttonhole width

Press the mode selection key to enter the stitch
width adjusting mode.
Press the Down (–) key to decrease buttonhole width.
Press the Up (+) key to increase buttonhole width.
The width of round end buttonhole can be varied
q w
from 2.5 to 5.5.
q Narrow buttonhole (2.5mm wide)
w Wide buttonhole (5.5mm wide)
∼
The width of keyhole buttonhole can be varied from
5.0 to 7.0.
q Narrow buttonhole (5.0mm wide)
w Wide buttonhole (7.0mm wide)
Refer to page 48 for stitch density adjustment.
q w
∼
50